Exactly how to Troubleshoot and Fix an Electric Water Heater
Exactly how to Troubleshoot and Fix an Electric Water Heater
Blog Article
Each person will have their unique opinion on the subject of Hot Water Heater Repair.
Lots of modern-day houses utilize an electric hot water heater for their heater, as a result of its convenience as well as convenience of use. Nonetheless, just like any other electrical home appliances, troubles might emerge with its usage, suddenly. It can be truly irritating to awaken to a cold shower rather than a warm one or having your bathroom with water that isn't hot sufficient and even as well hot. Whatever the situation might be, hot water heater troubles can be quite nerve-racking. Fortunately, we've made a list of possible solutions to your water heater issues. There are a number of variables that can create many of these troubles, it could be a concern with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you turn off the primary power supply for safety. Whatever the issue is, getting it taken care of need to not position way too much of a problem if you adhere to these steps:
Inspect Your Power Supply:
As basic as this might appear, it is extremely essential. Without adequate power, your hot water heater will not operate. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power problem. Examine if the fuse is blown out or the circuit breaker stumbled. If the circuit breaker is the concern, just turn it on and off again. Replace any kind of damaged or worn-out fuse. Check the appliance with power after these adjustments to see if it's now working.
Inspect the Heating Element in the Hot Water Heater:
If it's not a power problem, after that try having a look at your burner if it is still functioning. Evaluate each of your burner to make sure the problem isn't with any one of them. If any one of them is malfunctioning, replace that part and then inspect whether the warm water is back on.
Examine Your Thermostat:
If your water heater still isn't functioning or the water coming out isn't warm enough, you might need to inspect the temperature settings on your top thermostat. Ensure the breaker is switched off prior to doing anything. Open the accessibility panel and press the red switch for temperature reset above the thermostat. This need to assist warm the water. Turn the breaker back on and also inspect if the trouble has been solved.
Call A Professional:
If after changing all damaged parts as well as resetting your temperature level, the water heater still isn't functioning, you might need to call an expert plumber for an expert point of view. The issue with your heating system could be that the hot and cold taps have actually been switched over or it might be undersized for the amount of hot water needed in your house. Whatever the situation might be, a specialist plumber would help fix the trouble.
Verdict
Hot water heater problems are not always major. A number of them are because of small concerns like a blown fuse or damaged burner. Replacing the faulty components need to suffice. Nonetheless, if you are still unable to solve the problem, give a call to your closest plumber to find to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I have been very fascinated with How to Troubleshoot and Repair an Electric Water Heater and I'm hoping you liked the entire piece. Those who appreciated our post if you please don't forget to share it. We truly appreciate reading our article about Hot Water Heater Repair.
Automated Marketing
Report this page